Burning BIN/CUE Images with Nero Burning Rom
BIN/CUE image format is quite common on the Internet. It might seem that finding an appropriate software for burning these images is quite hard. Luckily, it's not. In addition to
Golden Hawk CDRWin, the original software for BIN/CUE format, you can also use
Nero Burning Rom to burn the images.
Please make sure that you have the
latest version of Nero (at least 5.5.8.2) before proceeding.
Verify the CUE-sheet and open it with Nero 
Before doing anything else you have to verify that the path in the CUE-sheet is correct. A CUE-sheet is a plaintext file describing the structure and the location of the BIN-file. You can open up the .CUE -file using, for example,
Notepad.
The file should look something like this:
FILE "IMAGE.BIN" BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00
Usually the CUE-filename and the BIN-filename have the same body -- e.g. IMAGE. All you need to do is verify that there is no path information on the
FILE "IMAGE.BIN" BINARY-line. Ie. it should
not read e.g.
FILE "C:\TEMP\IMAGE.BIN" BINARYIf there is any path information on the line, just remove it so that you have just the name of the .BIN-file as in the example above. Also make sure that the name of the .BIN in the CUE-sheet is the same as the actual .BIN file you have on hard-disk.
Next load
Nero Burning Rom and choose
File, Burn Image....
Load the CUE-sheet in Nero 
Choose the
Files of Type: dropdown menu and select
All Files *.*. Next just locate the
.CUE file, select it and click
Open.
Make sure you select the .CUE -file, not the .BIN -file. Burn the image 
All you have to do then is
choose the writing speed,
select the Disc-At-Once Write Method, and click
Write.
That's it! After a couple of minutes you'll have a CD with the BIN/CUE Image written on it.
Notice! Nero is not capable of handling all kinds of BIN/CUE Images. If you have problems using Nero for your image file, you should take a look at CDRWin instead. 
Burning BIN/CUE Images with Nero Burning Rom
Linear Mode
